• 9.00 - 18.00
    • Via Monte Aquila 8 - 43124 Parma
    • 0521 631411

    Divas 6053

    Fuel type

    Indispensable for your MemoBike 6050

    The 6053 DIVAS is the new accessory available for the 6050 Memobike, which extends the range of diagnostic capabilities, through a series of additional applications necessary for the proper tune-up of 2-wheeled vehicles:

    – Synchronizing of the throttle valves on carburetor and fuel injected systems
    – Dynamic analysis of the manifold intake pressures
    – RMP reading
    – Synchronization procedures integrated with diagnostic functionalities of the engine control unit (idle speed control lock, TPS and / or self-adaptive parameter reset, analysis of fault code memory, verification of proper operating conditions, etc. )
    – 3 analog inputs for dynamic analysis and data acquisition of vehicle sensors
    – built-in microphone

    Through the 6053 DIVAS, you can synchronize the throttle valves, according to the manufacture’s recommendations. The graphic display through color bars of pressure values, the indications of the minimum and maximum of each channel and the real time engine speed, allow precise and intuitive operations. The green color and the buzzer advise the user of the perfect pressure alignment of the intake manifolds, subject to analysis.

    In case of difficulties in achieving the desired synchronization, dynamic and simultaneous pressure analysis of each channel, through color graphics, allows the detection of sealing problems of valves, cylinders and /or ducts.

    The integration of synchronization with diagnostic functionalities, allow without the use of additional equipment, to set up the bike correctly acting on the idle speed control lock (when applicable) or to carry out the intervention with all the resets recommended by the manufacturer service manual.
    Through the connection to the sensors on the vehicle, 3 analog inputs allow the real-time monitoring and storing of acquired data, extending the diagnostic potential of the instrument. The user will be able to indulge in a variety of activities, ranging from simple dynamic display, a comparative analysis between the analog inputs and the values indicated by the control unit, to achieve high-speed acquisition and subsequent processing of the monitored signals.
    The built-in microphone allows acoustic analysis of the vehicle, useful when working with the silencer.

    Technical features
    Pressure sensor channels 4
    Pressure sensor range from 15 KPa to 115 KPa (from 150 mBar to 1150 mBar)
    Pressure sensor accuracy +- 1 mBar
    Pressure sensor sampling speed 1 ms
    Selectable pressure measuring units mBar, KPa, cmHg, A/D steps
    Sensor/Digital input (AUX) 0-5 volt and 0-12 volt
    Sensor power supply output (AUX) 5-12 volt stabilized
    Engine speed range 400-6000 rpm
    Built-in microphone Sound pressure reading in decibels (db)
    Power supply
    Self-powered by 6050 internal battery 
    Additional features
    Atmospheric pressure display 
    pressure sensor self-calibration 
    Save and replay test 
    4 M5 connector 
    4 M6 connector 
    1 T 
    Hoses 4x7 mt 6 (chemical resistant)
    Hoses 5x8 mt 0,5 (silicone/heat resistans)